​
Thank you for purchasing one of our products! Above you will find pdf's of all of our Manuals, Assembly Instructions, and Parts Lists. If you need help identifying your lift please see the section on our FAQ pages or choose your lift type below.
​
If you have any other questions please feel free to contact us.
​
Vertical Lift
Your lift should have a model and serial number label located on the cradle. The model should start with LSV + 5 digits (first two denote weight capacity: example 40=4000 lbs, next three are beam width: example 108=108")+ 1 to 3 letter code (this denotes series and type).
If you can't find the tag please use the flow chart below.
If your lift does not match the above, you may have an older model (pre 2000) as shown below.
PWC Lift
Your lift should have a model and serial number label located on the mainframe near the winch. The model should start with LSC + 3 to 4 digits + 1 letter code (optional).
If you can't find the tag please consult the flow chart below.
Cantilever Pontoon Lift
Your lift should have a model and serial number label located on the cradle. The model should start with LSP + 2 digits + 1 letter code.
If you can't find the tag please use the flow chart below. If your lift is 20' long it is an LSP20H which we now offer with 4' extensions LSP04H.
